SOLID MECHANICS LAB

LIST OF EXPERIMENTS:

1. Tension test on Structural Materials: Mid steel and Tor steel (HYSD bars)

2. Compression Test on Structural Materials: Timber, bricks and concrete cubes

3. Bending Test on Mild Steel

4. Torsion Test on Mild Steel Circular Bar

5. Hardness Tests on Ferrous and Non-Ferrous Metals: Brinnel and Rockwell Tests

6. Test on closely coiled helical spring

7. Impact Test: Izod and Charpy

8. Demonstration of Fatigue Test

SURVEYING PRACTICE

LIST OF EXPERIMENTS:

1. Chain surveying

2. Compass surveying

3. Plane Table survey

4. Leveling

5. Contouring

6. Traversing by Using Theodolite: Preparation of Gales Table from field data

7. Traversing by using Total Station

8. Use of Total Station for leveling and Contouring

9. Setting out of Simple Curves

SOIL MECHANICS LAB

LIST OF EXPERIMENTS:

1. Field identification of different types of soil as per Indian standards [collection of field samples and identifications
without laboratory testing], determination of natural moisture content.
2. Determination of specific gravity of i) Cohesionless ii) cohesive soil
3. Determination of Insitu density by core cutter method & sand replacement method.
4. Grain size distribution of cohessionless soil by sieving & finegrained soil by hydrometer analysis.
5. Determination of Atterberg’s limits (liquid limit, plastic limit & shrinkage limit).
6. Determination of co- efficient of permeability by constant head pemeameter (coarse grained soil) & variable head
parameter (fine grained soil).
7. Determination of compaction characteristics of soil.

8. Determination of compressibility characteristics of soil by Oedometer test ( co-efficient of consolidation & compression
Index)
9. Determination of unconfined compressive strength of soil
10. Determination of Shear parameter of soil by Direct shear test
11. Determination of undrained shear strength of soil by Vane shear test.
12. Determination of shear parameter of soil by Triaxial test (UU)
13. Standard Penetration Test

FLUID MECHANICS LAB

LIST OF EXPERIMENTS:

1. Determination of Orifice co-efficient
2. Calibration of Orifice meter
3. Calibration of V- Notch
4. Measurement of velocity of water in an open channel using a pitot tube
5. Measurement of water surface profile for flow over Broad crested weir
6. Preparation of discharge rating curve for a sluice
7. Measurement of water surface profile for a hydraulic jump
8. Determination of efficiency of a Centrifugal pump
9. Determination of efficiency of a Reciprocating pump
10. Determination of efficiency of a Pelton wheel Turbine
11. Determination of efficiency of a Francis Turbine
12. Determination of efficiency of a Hydraulic Ram

CONCRETE LABORATORY

LIST OF EXPERIMENTS:

1. Tests on cement – specific gravity, fineness, soundness, normal consistency, setting time, compressive strength on
cement mortar cubes
2. Tests on fine aggregate – specific gravity, bulking, sieve analysis, fineness modules, moisture content , bulk
density and deleterious materials.
3. Tests on coarse aggregate - specific gravity, sieve analysis, fineness modulus, bulk density.
4. Tests on Fresh Concrete: Workability : Slump, Vee-Bee, Compaction factor tests
5. Hardened Concrete: Compressive strength on Cubes, Split tensile strength, Static modulus of elasticity, Flexure
tests , Non destructive testing (Rebound hammer & Ultrasonic pulse velocity)
6. Mix Design of Concrete.

ENGINEERING GEOLOGY LAB

LIST OF EXPERIMENTS:

1. Study of crystals with the help of crystal models
2. Identification of Rocks and Minerals [Hand Specimens]
3. Microscopic study of Rocks and minerals
4. Study of Geological maps, interpretation of geological structures Thickness problems, Bore-hole
Problems

HIGHWAY ENGINEERING LAB

LIST OF EXPERIMENTS:

1.Tests on highway materials – Aggregates- Impact value, Los-Angeles Abrasion value water absorption , Elongation &
Flakiness Index.
2.Bitumen & bituminous materials: Specific gravity, penetration value, softening point, loss on heating, Flash & Fire point
test.
3. Stripping value test
4. Design of B.C. & S.D.B.C. Mix
5. CBR Test
6. Marshal Stability Test
7. Benkelman beam Test.

WATER RESOURCES ENGINEERING LAB

Test perform : 

1. Catchment area calculation 

2. Symon's rain gauge is a non-recording rain gauge used by the Indian meteorological department to measure rainfall: 

Components

A Symon's rain gauge consists of a funnel, a circular collecting area, a receiving bottle, and a metallic container. The collecting area has a diameter of 127 mm and the rim of the collector is 305 mm above the ground. The receiving bottle is cylindrical and made of zinc .

3. Weight bucket rain gauge test. 

4. Site visit in Imd malda . 

5. Pan evaporator 

6. Sun shine recorder 

7. Double ring infiltration 

ENVIRONMENTAL ENGINEERING LAB

Test perform:

1) Determination of pH 

2) Determination of turbidity 

3) Determination of Hardness 

4) Determination of Acidity 

5) Determination of alkalinity 

6) Determination of TDS

7) Determination of BOD

BIOLOGY LAB

1. Study of transpiration in plants

2. Stomatal index calculation

3. DNA extraction from banana

4. Quadrate study

Computer Aided Civil Engineering Drawing Lab

Computer Aided Civil Engineering Drawing Lab (CE(ES)-392

1) Introduction to computer Aided drafting and different  coordinate system

2) Exercise on draw and modify tool bars 

3) Exercise on layer,  dimension,  testing and  block etc

4) building with load bearing walls including details of door and windows

5) Reinforcement drawings for typical slabs, beams, column and  spread footings

6) perspective view of one and two storey buildings

7) Brick masonry ( english  bond, flemish bond,  stretcher and header bond)

Computer Application in Civil Engineering (CE(PC)-597)

1) Introduction : Concept of problem- solving using computer,  use of programming  language  and software for problems  solving, identification od various design and analysis  problems  in different  field of Civil Engineering to bee solved using computer.

2) Use of spreadsheet:  Learning  spreadsheets  like MS Excel, Matrix  analysis,  application to problems  involving tabular data , CE estimation, surveying snd design problems. 

3)  Programming  Languages: Learning  at least one Languages  : Fortran 2003/ 2008/2018, c++11/C++14/mathCad; Solving analysis and design problems in area like surveying , hydraulics,  structural  analysis,  RCC design, soil mechanics and foundation,  transportation,  water resources  etc.

4) Use of software: Familiarity  with widely used Civil engg software like STAAD Pro, HECRAS, HEC-HMS, SWMM, MX Roads, etc. Solving  at least Two such analysis/ design problems.